Air Balancer
Inquiry

MS-ATC Series

Catalog
Fetures
  • Hoisting capacity:0～140kg.
  • The up and down buttons and handle are mounted on the lower hook.
  • While ensuring the stability of a suspended load, the balancer provides better controllability compared to the standard pendant type.
  • Speed control is available using the speed adjustment screw of the lift control module.
  • The fall-arrest device prevents the load from dropping even if the air supply is shut off or when the pendant switch hose breaks.
Gallery
MS-ATC Series
MS-ATC Series
Control Module Specification
Control module Model Hose Operation Weight(Kg) Body
Hosting MS-ATC Coil hose×3 Pendant 6 EHB-50S(C), 50(C), 85(C), 130(C)
Air Balancer Series (Wire rope)
Model Air pressure
(MPa) 		Max lifting
capacity
(kg) 		Stroke
(m)		 Weight
(kg)(*) 		Cable diameter
(mm)		 Air inlet
EHB-50S 0.7 55 0.7 21 Φ4.76 Rc 3/8
0.6 48
0.5 40
0.4 32
EHB-50 0.7 55 1.9 28 Φ4.76 Rc 3/8
0.6 48
0.5 40
0.4 32
EHB-85 0.7 90 1.9 29 Φ4.76 Rc 3/8
0.6 75
0.5 62
0.4 50
EHB-130 0.7 140 1.9 36 Φ4.76 Rc 3/8
0.6 120
0.5 100
0.4 80

（*）Weight: Without module

Air Balancer Series (Link chain)
Model Air
pressure
(MPa)		 Max lifting
capacity
(kg)		 Stroke
(m)		 Weight
(kg)(*) 		Chain size x Fall Air inlet
EHB-50SC 0.7 55 0.65 20 4.0×1 Rc 3/8
0.6 48
0.5 40
0.4 32
EHB-50C 0.7 55 1.8 29 4.0×1 Rc 3/8
0.6 48
0.5 40
0.4 32
EHB-85C 0.7 90 1.8 30 4.0×1 Rc 3/8
0.6 75
0.5 62
0.4 50
EHB-130C 0.7 140 1.8 37 4.0×1 Rc 3/8
0.6 120
0.5 100
0.4 80

（*）Weight: Without module


Accessories
Rail system
Rail System

This system allows horizontal movement of lifting equipment, enabling easy transportation and transfer by hand.

Rail system detail page
Jib Crane
Jib Crane

A floor-mounted jib crane is available as an accessory. The traveling rail is made of aluminum, enabling light and smooth operation.

Jib crane detail page