| What is crusher for metal chips? |
- The volume of metal chips exhausted machine tools could be great because form of chips is fluffy and it causes the extremely large clearance between chips.
- Our crusher for metal chips installed at outfall of conveyor for its exhaust can reduce volume of chips by shortening the length of the chips which are cut one after another by the crusher.
- The crushers for metal chips of ENDO are newly developed and small crusher to which chips is fed from conveyor.
|
| Biaxial cutter |
|
|
| Ｆeature |
- The latest metal chip crusher can save much space than old model, because crushing chamber and drive motor are not separately designed, but are designed as a unit.
- There are two types of drive motor, namely 2.2kW and 3.7kW. You can make a choice,? which depends on the quantity of crushed chips.
- We can provide a hopper or a base which is adjusted to width of chip crusher’s exhaust installed to the machine tool.
- We can also provide you a conveyer for exhaust from the chip crusher.
|
|
| Specification Ｍodel ECK15-30 |
| Ｔhe way of crush |
Biaxial cutter |
| Dimension of crushing chamber |
300X280mm |
| Diameter of cutter |
150mm |
| Width of cutter |
25mm |
| Number of cutter |
12 |
| Drive motor |
2.2kW |
3.7kW |
| Capacity |
80kg/h(Steel) |
120kg/h(Steel) |
| Mass |
380kg |
| Granularity |
25X40mm |
| Volume reduction rate |
1/2-1/6 |
| |
- The crushed chips could be combined with each other, when they are exhausted.
- When too much metal chips to be crushed are thrown, not finely crushed but compressed chips could be exhausted.
- Overload could be caused when too much metal chips are thrown.
|
|
|
